Press "Enter" to skip to content

What is Gyp-Crete for?

What is Gyp-Crete for?

The brand name Gypcrete; a Maxxon Corporation trademark has become used universally as the term for gypsum concrete by construction professionals and architects. It’s used extensively in condominium, apartment and hotel constructions for sound reduction, fire resistance, radiant heating and floor leveling.

What is the difference between Gypcrete and concrete?

A 1.5-inch slab of gypsum concrete weighs 13 pounds per square foot versus 18 pounds per square foot for regular concrete. Even though gypsum concrete weighs less, it still has the same compressive strength as regular concrete, based on its application as underlayment or top coat flooring.

How do you make a gyp in Crete?

a) Start mixing by putting 4.5 quarts of water (using a calibrated pitcher) per bag of Gypcrete to be mixed in the mixing bucket or barrel. b) Add the number of 50 lb (22.5 kg.) bags of Gypcrete (to be mixed) to the water, mix thoroughly until lump free (sand is pre-mixed into the Gypcrete product).

What PSI is Gypcrete?

Gyp-Crete 2000/3.2K delivers compressive strengths between 2,000 psi (13.8 MPa) and 3,200 psi (22.1 MPa), enhanced resistance to surface abrasion, and faster drying time. it’s ideal for use over wood subfloors in single family, light commercial and multifamily construction, as well as renovation projects.

Is gypcrete toxic?

Dust which is considered potentially toxic associated with gypcrete is generated during crushing, mixing, sanding or otherwise working with the product. Reviewing a manufacturer’s Material Safety Data Sheet (MSDS), most concern of health risk is associated with dust created by the raw ingredients.

What should I put over gypcrete?

A layer of asphalt paper or another thin sublayer can be laid over the gypcrete. Floating hardwood floors are typically installed right over the gypcrete, as this allows for expansion of the wood floor.

Is Gypcrete sound proof?

A sound absorbent material, such as rubber matting, gypsum concrete “gypcrete”, or a layer of homasote – will reduce airborne and impact noise transmission into the space below. A note on gypcrete: Typically, wood floors, resilient floors or carpeting are fastened to the gypcrete with an adhesive product.

Can Gypcrete be a finished floor?

Gypsum can’t be used as a finished floor, but it can serve as an underlayment for a variety of other floor coverings.

How do you test moisture in Gypcrete?

To use a drywall moisture meter, simply push the pins of the meter into the drywall or Gyp-Crete you’re testing and push the button to take a reading. The meter will measure the moisture in the sample and provide a reading for you to use. If you don’t have a moisture meter with a drywall scale, this might be tougher.

Is Gypcrete the same as lightweight concrete?

The two most important differences are that traditional lightweight concrete, unlike gypsum concrete Underlayment, requires caulking at the perimeter to limit sound transmissions and reinforcing for stability in doorways.

How long does gypcrete take to cure?

Approximately 7 to 14 days
After the pour, maintain a 50 degree temperature and adequate ventilation to dry floor. Approximately 7 to 14 days are required for complete curing, depending on climatic conditions.

Can gypcrete be a finished floor?

When was Gyp Crete introduced to the construction industry?

Today, the Maxxon lineup includes an array of proven solutions that continue to define the industry. And we’re still writing that story When Gyp-Crete Corporation introduced Gyp-Crete in 1972, it revolutionized the construction industry with its fast, easy installation, and superior strength. But the revolution didn’t end there.

Which is the correct spelling Gypcrete or Gyp Crete?

You should leave concrete floors to the experts. Gypcrete, the common spelling for a trademarked brand of gypsum concrete by Maxxon, is correctly known by its industry designation — Gyp-Crete®.

What kind of material is Gypcrete used for?

The branded name, Gypcrete, trademarked by the Maxxon Corporation, is a type of structural material that is typically utilized as flooring underlayment, sound-canceling, and in wood-frame and concrete building for fire ratings and is extremely popular in houses, condo jobs, and hotel building and constructions.

What do you need to know about gypsum flooring?

Gypcrete is a gypsum concrete floor underlayment used in wood-frame and concrete construction for floor levelling, radiant heating, sound reduction, and fire ratings. You must be a licensed applicator to install gypcrete. Gypcrete has many advantages over lightweight concrete.