Press "Enter" to skip to content

Who built the West Gate Bridge?

Who built the West Gate Bridge?

A royal commission into the disaster was scathing of the design and methods used by the two companies building the bridge, John Holland and World Services, and the attempts to rectify the bridge’s flaws.

Why did they build the West Gate Bridge?

As early as 1957, businesses in Melbourne’s west were demanding easier access to and from the city. After a false start, the Lower Yarra River Crossing Authority began work in 1965 to build a bridge paid for by those using it.

Why did the West Gate Bridge fall down?

It was proposed that the higher one be weighted down with 10 concrete blocks, each 8 tonnes, which were located on site. The weight of these blocks caused the span to buckle, which was a sign of structural failure. As the bolts were removed, the bridge snapped back and the span collapsed.

How long did it take to build the West Gate Bridge?

about two years
The West Gate Bridge collapsed just before lunchtime on October 15, 1970, in the country’s worst industrial accident. The bridge was about two years into construction at that point.

How many died in the West Gate Bridge collapse?

The West Gate Bridge disaster death toll stands at 32. Nobody knows how many men still lie under the tangled mess of concrete and rubble. Two bodies can be seen among the wreckage and at least 12 and possibly 17 are unaccounted for. Eighteen men are injured, eight of them seriously.

How deep is the water under the West Gate Bridge?

The main river span is 336 metres (1,102 ft) in length, and the height above the water is 58 metres (190 ft)….

West Gate Bridge
Total length 2,582.6 metres (8,473 ft)
Width Maximum of 37.3 metres (122 ft)
Longest span 336 metres (1,102 ft)
Clearance below 58 metres (190 ft)

How many workers were killed in the West Gate Bridge tragedy?

35 workers
Every year a memorial service is held for the 35 workers who lost their lives when a span of the West Gate Bridge collapsed at 11.50am on this day in 1970.

Did anyone survive the West Gate Bridge collapse?

He suffered multiple serious injuries. John Laino was still wearing his John Holland safety helmet after the span went down, and boilermaker George Stassoulakos of Northcote also escaped without a scratch.

How deep is the water under the West Gate bridge?

What year did West Gate bridge collapse?

1965
West Gate Bridge/Construction started

Is the West Gate Bridge sinking?

‘ A Department of Transport spokesman said: ‘The West Gate Bridge is not sinking and there are no safety concerns or any changes to the operation of the Bridge.

What year did West Gate Bridge collapse?

When was the construction of the West Gate Bridge completed?

Construction resumed in 1972 with World Services and Construction continuing to fabricate the boxes and to carry out their sub-assembly, but with John Holland Group completing the construction of the steel portion of the bridge. The bridge was completed in 1978.

Who are the designers of the Westgate Bridge?

The designers, Freeman Fox and Partners, were found guilty of improper structural design and the original contractors, World Services and Construction Pty Ltd, were found guilty of putting forward inadequate safety margins – which would have been inadequate even had the bridge been completed.

When did the West Gate Bridge collapse in Melbourne?

An important crossway between Melbourne’s CBD and the western side of Melbourne, the bridge was the scene of a terrible disaster that took the lives of 35 workers when the bridge collapsed on October 15th 1970, the worst industrial disaster in Victoria’s history. In 1970, two years into the construction…

Who was the chief engineer for the Golden Gate Bridge?

Strauss was chief engineer in charge of overall design and construction of the bridge project. However, because he had little understanding or experience with cable-suspension designs, responsibility for much of the engineering and architecture fell on other experts.